Products/ J-mini/EPC • J-INOX/EPC • MG-INOX/EPC • JBR/EPC • PB/EPC

J-mini/EPC • J-INOX/EPC • MG-INOX/EPC • JBR/EPC • PB/EPC


  • J-mini/EPCJ-mini/EPC
  • J-INOX / EPC
MG-INOX / EPCJ-INOX / EPC
    MG-INOX / EPC
  • PB / EPCPB / EPC
  • JBR / EPCJBR / EPC

DESCRIPTION AND USE

Water pressure systems featuring with electronic control system EPC (Electronic pressure control system) widely used in the nautical sector to grant a suitable and constant water pressure for all on-board appliances such as: showers, washbasins, toilets, etc.

The water pressure systems manufactured by the company C.E.M. featuring the electronic control system EPC are designed to accomplish the automatic control of the pump. The EPC will automatically control the start and stop stages when the pressure drops or when the water supply to the system is interrupted granted the following advantages:

  • automatic stop of the pump when the water supply has run out (this prevents the pump from a harmful dry running)
  • constant monitoring of the operation by means of warning lights: green light “Line”= pump on;red light” Failure”: pump off due to an anomaly (for example running out of the water).
  • constant pressure during the water distribution.
  • overall dimensions reduced respect the traditional water pressure system with tank.

In case of a stop due to running out of the water, the EPC device will allow the pump to make brief starts at regular breaks to check the availability of water in an independent way. If the pump is able to take in water during one of these attempts (max. 4), the pressure booster set will restart its normal operation. After four attempts, the EPC device will stop the pump completely. The pump can then be restarted only by pressing the “reset” button.

Composition of the water pressure system:
Our electric water pressure system are normally equipped with:

  • Electric pump type J-mini, J-INOX, MG-INOX, JBR or PB (voltage and performances as shown in the table).
  • Electronic pressure control EPC
  • Non return valve in the inlet

SCOPE

  • Liquid free of solid impurities
  • Temperature range of the liquid: from +0 to +50 °C (+70°C for series PB and series JBR)
  • Static pressure inside the pump body: 6 bar max.

ACCESSORIES ON REQUEST

  • “Omega” base made in stainless steel with antivibration

PERFORMANCES

Modello
Type
Materiale
Material
Voltaggio
Voltage
(V)
Potenza
Power
Assorbimento
Absorption
(A)
Giri/min.
RPM
Portata Max.
Max. delivery
(l/min.)
Prevalenza Max.
Max. head
(m)



HP kW



J-mini/EPC Acciaio inox
Stainless steel
12 0,4 0,3 33 2200 55 2,8
24 0,5 0,4 20 2600 55 3
230M 0,75 0,55 3,6 2800 55 3,9
J-INOX/EPC Acciaio inox
Stainless steel
12 0,7 0,52 40 2400 50 3
24 0,8 0,6 28 2600 50 3,8
230M 0,8 0,6 3,8 2800 50 4,8
MG-INOX/EPC Acciaio inox
Stainless steel
24 1 1 40 2800 90 5
230M 1 1 5 2800 90 5

 

Modello
Type
Materiale
Material
Voltaggio
Voltage
(V)
Potenza
Power
Assorbimento
Absorption
(A)
Giri/min.
RPM
Portata Max.
Max. delivery
(l/min.)
Prevalenza Max.
Max. head
(m)



HP kW



PB/EPC Bronzo
Bronze
12 0,6 0,44 36 3000 36 4
24 0,65 0,48 22 3000 36 4,2
230M 0,5 0,37 2,3 2800 36 4
JBR/EPC Bronzo
Bronze
12 0,7 0,52 42 2200 44 3
24 0,8 0,6 28 2600 55 3,6
230M 0,8 0,6 4,5 2800 55 5,2
JBR 2/EPC Bronzo
Bronze
24 1 0,75 45 2800 75 4
230M 1 0,75 5,7 2800 75 4
JBR 3/EPC Bronzo
Bronze
24 1,5 1,1 60 2800 100 5
230M 1,5 1,1 7,4 2800 100 5
JBR 4/EPC Bronzo
Bronze
230M 2 1,5 9,2 2800 160 5

24V: CORRENTE CONTINUA / DIRECT CURRENT
230M, 50Hz: corrente alternata monofase / single-phase alternate current

A richiesta disponibili altri voltaggi a 50Hz e 60Hz / Available on request other voltages at 50Hz and 60Hz.