DESCRIPTION AND USE
Axial electric blowers widely used on board for suction and ventilation of air in closed environments (WC, kitchens, engine rooms, etc.).
CONSTRUCTION FEATURES
Drum casing:
VE series: made in painted steel sheet
VEX series: made in stainless steel
Fan: made in polypropylene (temperature range -5°C + 80°C), dynamically and statically balanced.
ELECTRIC MOTOR
Direct Current:
Permanent magnets motor 12/24 V, Protection IP44 (IP55 on request), Insulation Class F, Continuous Duty (S1).
Alternate Current:
Induction electric motor, 230V single-phase (M) / 230÷400V, 400÷690V three-phase (T), 50Hz, Protection IP54÷55, Insulation Class F, Continuous Duty (S1).
ACCESSORIES ON REQUEST
Fan made in aluminium
Bi-direction fan made in Nylon / Glass to grant the same performances in both directions of flux (flux A: ventilator + flux P: extractor). Temperature range: – 35°C + 110 °C.
Additional protection grid
FLUX DIRECTIONS
Attention: the flux direction, protection grid position and the execution of the blower must be stated when the ordering (see page 169 for more specification)
A-A1 flux: ventilator
P-P1 flux: extractor
R-R1 flux: bi-directional (A & P)
12V-24V: DIRECT CURRENT
230M, 50Hz: single-phase alternate current
230÷400T, 400÷690T, 50Hz: three-phase alternate current
Available on request other voltages at 50Hz and 60Hz.
12V-24V: DIRECT CURRENT
230M, 50Hz: single-phase alternate current
230÷400T, 400÷690T, 50Hz: three-phase alternate current
Available on request other voltages at 50Hz and 60Hz.
